1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

t98 tranny for a F134

Discussion in 'Early CJ5 and CJ6 Tech' started by gary navo, Jan 26, 2006.

  1. Jan 26, 2006
    gary navo

    gary navo New Member

    Berkeley, CA
    Joined:
    Jan 20, 2006
    Messages:
    5
    I have a t98 that has a rust pitted input shaft. The tranny was making noise in 4th gear. I sent it into be rebuilt, they say they replaced everything but the input shaft. Still makes the noise. Only in 4th gear. Click, click, click in high gear only, stops when I ease off of the gas. Still makes the noise when the transfer case is in neutral. I either need to get a 10 3/8", 10 spline, 27 snychro teeth, pitch left, 17 tooth p/n t98a-16m input shaft, or I need another tranny. Help!
     
    gary navo, Jan 26, 2006
    #1
  2. Jan 26, 2006
    gary navo

    gary navo New Member

    Berkeley, CA
    Joined:
    Jan 20, 2006
    Messages:
    5
    Sorry. I have a 65CJ5 with the f134 engine.
     
    gary navo, Jan 26, 2006
    #2
  3. Jan 26, 2006
    vanguard

    vanguard

    vanguard, Jan 26, 2006
    #3
  4. Jan 26, 2006
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    I agree with Joel, try the guys he listed first.
    Here's the link to R&P
    http://www.r-p4wd.com/


    If you strike out with them, try PartsMike
    www.partsmikeparts.com

    With each of these sources, it's best to contact them by phone with your request.

    HTH, let us know how you make out.
     
    lynn, Jan 26, 2006
    #4
New Posts