1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

BT3-C S/N Tags

Discussion in 'Jeep Trailer Tech' started by Chris Insull, Jan 20, 2006.

  1. Jan 20, 2006
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    Well, I found a source for the tags over at the G-503 site, unfortunately he's in the Netherlands! Here's the link: http://www.g503.com/forums/viewtopic.php?t=61066
    Now, I don't have a problem with them as they appear to be of great quality. The cost for two is $33 USD, including shipping (good price!). I would, however, like to find a source here in the US. Any ideas? TIA.:beer:
     
  2. Jan 21, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    Chris, mine looks that good, if not better. send me a pm and i'll get one for you. I have just been too busy since the middle of december to get a pic for you (until today). Measure the center-to center distance between rivets and let me know. Mine ended up ~1/8" off so I had to drill the hole out larger before riveting the new one one. I want to make sure it is correct.
     
  3. Jan 21, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    Here is a pic. I used 1/16" metal stamps...they are a tiny bit too small. 1/8" are too big. 3/32" should be the correct size, but Harbor freight did not have those for $4.99 a set ;)
     
  4. Jan 21, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    If Chris wants one, and anybody else....let me know and I will have more made this week. It cost me $14 and change with tax, so you would pay that plus shipping.
     
New Posts