1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Table pics for DanStew

Discussion in 'Builds and Fabricators Forum' started by DKillam, Jan 12, 2006.

  1. Jan 12, 2006
    DKillam

    DKillam Sponsor

    San Angelo, Texas
    Joined:
    Oct 31, 2005
    Messages:
    228
    "I didn't make this table - it was a leftover from a construction project and the welder left it behind. I'll get a better pic of it this afternoon. 1/4" plate top with 2" angle supports underneath. 2 3/8" pipe legs and 1/4" x 3" strap spreaders. Footprint is 24 x 32 with top being 16" x 32" x 34" tall. It's a little top heavy, but a fairly good utility table. I'd really like one with heavier top, possibly 3/8 or 1/2 plate - maybe some day. The other table (pics to follow) is one I built about 30 yrs ago when I was learning to weld. It's stout but needs a better overhang to clamp things to."


    Sorry it took so long to get the pics. :oops:
     
    DKillam, Jan 12, 2006
    #1
  2. Jan 12, 2006
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    it looks pretty heavy. I guess you dont move it around much ;) Right now i am making a wood cart to hold the welders, but on top i am going to skin it with steel and mount a vise i have sitting around. Probably experiment with it for a bit and see if it is what i want. I am trying to find something compact and usable. I put wheels on it to move around :)
     
    DanStew, Jan 12, 2006
    #2
New Posts