1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

acarberator I.D.

Discussion in 'Early CJ5 and CJ6 Tech' started by ss70l78, Dec 13, 2005.

  1. Dec 13, 2005
    ss70l78

    ss70l78 New Member

    Joined:
    Oct 8, 2005
    Messages:
    10
    I need to rebuild my carb. How can I identify what kit to buy. I can't find a tag. A 63 with F134.
     
    ss70l78, Dec 13, 2005
    #1
  2. Dec 13, 2005
    vanguard

    vanguard

    Should be a Carter YF if stock. Could also be a solex or possibly a weber if modified. Post a picture if you can.

    If it's stock year and model should suffice at the local FLAPS.
     
    vanguard, Dec 13, 2005
    #2
  3. Dec 13, 2005
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Kamel (I think?) sez this is the place to get the best rebuild kits, most of 'em are crap. http://www.thecarburetorshop.com/

    There should be a web on the side of the YF body above the throttle linkage that says "938SA", or SB, SC, SD.
     
    Rondog, Dec 13, 2005
    #3
  4. Dec 13, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    x2 on the carb kits from your FLAPS being crap. Well, maybe not crap, but having the incorrect parts in them for a Jeep carb. The problem is that the Carter YF was used on so many different engines and makes of vehicles that it is virtually impossible to make one kit that will fit all carbs in all installations and still run well.

    Check the carburetor shop and tell them what your carb and engine are. They'll hook you up wit the right stuff at a reasonable price. Either that, or plunk a Solex on it and forget about it! ;)
     
    w3srl, Dec 13, 2005
    #4
New Posts