1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

holly 2300 2 bbl or stock rochester bbl

Discussion in 'Early CJ5 and CJ6 Tech' started by gochippermoon, Dec 8, 2005.

  1. Dec 8, 2005
    gochippermoon

    gochippermoon New Member

    castle rock, colo
    Joined:
    Oct 7, 2003
    Messages:
    49
    Thinking about using a holly 2300 2bbl. Whats your thoughts?
    will go on a 225 v6 stock engine. Does anyone know what part #? I live in colo. What size jets? I'm sure this has been discussed many times-
    Sorry if so.
     
    gochippermoon, Dec 8, 2005
    #1
  2. Dec 8, 2005
    Flexiheep

    Flexiheep Sponsor

    Las Cruces, NM
    Joined:
    Oct 25, 2004
    Messages:
    77
    Here is a link to the thread I had going like 3 weeks ago about this.... I ended up going with a 2300, and the reasons I did are in the link below.

    2300 thread

    There was also a bunch of stuff if you search this forum.

    If you have any questions about it, fire them off and I will try to answer if I can.
     
    Flexiheep, Dec 8, 2005
    #2
  3. Dec 8, 2005
    gochippermoon

    gochippermoon New Member

    castle rock, colo
    Joined:
    Oct 7, 2003
    Messages:
    49
    Mucho gracias for the info. Does anyone know what size jets for colorado? Altitude around 6500 ft.
     
    gochippermoon, Dec 8, 2005
    #3
  4. Dec 8, 2005
    Flexiheep

    Flexiheep Sponsor

    Las Cruces, NM
    Joined:
    Oct 25, 2004
    Messages:
    77
    If I remember what I have read correctly you go down 1 jet size for every 2000 ft above sea level. So you would need 3 jets smaller, I don't remember what comes stock right now. Once I get my ignition worked out I need to go down 2 sizes in mine.
     
    Flexiheep, Dec 8, 2005
    #4
New Posts