1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

hanging pedal conversion on a DJ3A

Discussion in 'Flat Fender Tech' started by graluc, Nov 22, 2005.

  1. Nov 22, 2005
    graluc

    graluc New Member

    Joined:
    Nov 22, 2005
    Messages:
    2
    I'm swapping a later model drive train in my recently aquired '56 DJ3A. I'd like to switch it to a hanging pedal set up for a hydrolic clutch. Any write ups on this? I've been searching and haven't found anything yet.

    Thanks!
     
    graluc, Nov 22, 2005
    #1
  2. Nov 22, 2005
    graluc

    graluc New Member

    Joined:
    Nov 22, 2005
    Messages:
    2
    I just ran across Advance Adapters clutch chain. Looks like an easier route to do. Any comments on it?
     
    graluc, Nov 22, 2005
    #2
  3. Nov 22, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Nov 22, 2005
    #3
  4. Nov 22, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Nov 22, 2005
    #4
  5. Nov 22, 2005
    critchy

    critchy New Member

    Joined:
    Nov 13, 2002
    Messages:
    26
    i have a set of swinging pedals from a cj5 that i am looking to sell if you are interested.
     
    critchy, Nov 22, 2005
    #5
  6. Dec 11, 2005
    eddyt

    eddyt Member

    chesapeake VA
    Joined:
    Oct 29, 2005
    Messages:
    178
    Do you still have the swinging pedals for sale?
     
    eddyt, Dec 11, 2005
    #6
  7. Dec 12, 2005
    critchy

    critchy New Member

    Joined:
    Nov 13, 2002
    Messages:
    26
    yes, i will dig them out and take a picture.
     
    critchy, Dec 12, 2005
    #7
  8. Dec 12, 2005
    eddyt

    eddyt Member

    chesapeake VA
    Joined:
    Oct 29, 2005
    Messages:
    178
    OK email me them I would like to take a look, thanks.
     
    eddyt, Dec 12, 2005
    #8
  9. Dec 12, 2005
    critchy

    critchy New Member

    Joined:
    Nov 13, 2002
    Messages:
    26
    could not figure how to upload pictures to email message. here they are.
     
    critchy, Dec 12, 2005
    #9
  10. Dec 31, 2005
    Olys45

    Olys45 New Member

    Grand Forks, ND
    Joined:
    Dec 28, 2005
    Messages:
    2
    I am also interested in a set of swinging pedals for my Frankenjeep.
     
    Olys45, Dec 31, 2005
    #10
  11. Dec 31, 2005
    Dootle

    Dootle New Member

    Carson City, NV
    Joined:
    Sep 23, 2002
    Messages:
    28
    I've had success finding TJ pedals here in the junkyards. They work well, and are a bolt-on for use with GM steering columns. I used a nice one from a '84 Firebird. I did have to cut, and shorten both pedal arms to fit my clearances about 1-1/2". I got a power steering pump from a Blazer.
    Saginaw box out of some mid 70's yank tank.

    Rob
    _________
    '47 CJ2a gonna build this summer W/ 225 V6
    '52 & '53 M38A1 parts
    '58 & '67 CJ5 parts
    '54 CJ3b F134 ALMOST ready to rummble
    '67 CJ5 Tux, parts
    '78 CJ5 360, go-go sca
     
    Dootle, Dec 31, 2005
    #11
New Posts