1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tempeture guage

Discussion in 'Early CJ5 and CJ6 Tech' started by mustanghd, Nov 12, 2005.

  1. Nov 12, 2005
    mustanghd

    mustanghd New Member

    Minneiska Mn.
    Joined:
    Oct 22, 2005
    Messages:
    20
    I went to my local parts dealer today to get a tempeture sending unit for my 65 cj-5 with the 134 in it and he told me that they didnt have one. He said that they didnt make one, well I have a sender in the engine and the guage in the speedo cluster so what gives. Does anyone know the part # for what I need? :? :?
     
    mustanghd, Nov 12, 2005
    #1
  2. Nov 12, 2005
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Mcruff, Nov 12, 2005
    #2
  3. Nov 12, 2005
    mustanghd

    mustanghd New Member

    Minneiska Mn.
    Joined:
    Oct 22, 2005
    Messages:
    20
    The needle in the guage moves if I ground the wire that connects to the sender so am I safe to assume that the guage is good and the sender is bad?
     
    mustanghd, Nov 12, 2005
    #3
  4. Nov 12, 2005
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Before you go too far, use the search function here. It's possible to ruin your existing gauge, if it still works. Replacements are not replicas, either. If FLAPS says they don't have a sender unit, go to NAPA, or do mail order through one of the venors recommended on this board. Do the search thing first; you'll pick up a bunch of info right there!
     
    Steamer, Nov 12, 2005
    #4
New Posts