1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

question

Discussion in 'Builds and Fabricators Forum' started by Drifter, Oct 26, 2005.

  1. Oct 26, 2005
    Drifter

    Drifter Luke the Drifter

    West TN
    Joined:
    Jun 24, 2004
    Messages:
    39
    I have a set of m38a1 parts I picked up for free when I went and got my v6 that's I'm swapping into my 2/3a project. well these springs are in much better condition than what's on there now.

    Anyone know if you can use the a1 springs on a 2a?

    Luke
     
    Drifter, Oct 26, 2005
    #1
  2. Oct 26, 2005
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    IIRC they'll be longer than your 2A springs...but since you have the 2A there it should be easy to compare...
     
    Boyink, Oct 26, 2005
    #2
  3. Oct 26, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    jd7, Oct 26, 2005
    #3
  4. Oct 26, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    I was just looking at that wondering what flattie springs were David.
     
    sparky, Oct 26, 2005
    #4
  5. Oct 27, 2005
    Mojave

    Mojave Member

    California High...
    Joined:
    Jul 1, 2005
    Messages:
    134
    Easy enough to measure - We measured mine at one time, and figured that the fronts off the M38A1 would fit the rear of my CJ3A, and the rears might fit on our CJ6. Too many leaves though - would make for a very rough ride.
     
    Mojave, Oct 27, 2005
    #5
New Posts