1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flaming River Install Help

Discussion in 'Early CJ5 and CJ6 Tech' started by Roboter, Sep 14, 2005.

  1. Sep 14, 2005
    Roboter

    Roboter Klaatu Barada Jeepto

    Loomis California
    Joined:
    Apr 13, 2005
    Messages:
    316
    Do I need to buy the FR bracket or can I use my existing bracket to my new column. My original column go's from 2" from the firewall up to what I believe is 3" on the shroud. I want it to be secure and don't want any gaps between the top of the FR shround and dash panel. The FR column is 2" all the way to the shroud. My pinto column goes 2" and increases in diameter to 3".

    Sorry if my description is confusing. :oops:

    Help. :(
     
    Roboter, Sep 14, 2005
    #1
  2. Sep 14, 2005
    Roboter

    Roboter Klaatu Barada Jeepto

    Loomis California
    Joined:
    Apr 13, 2005
    Messages:
    316
    Was thinking will a 3 to 2 inch pvc pipe reducer work?
     
    Roboter, Sep 14, 2005
    #2
  3. Sep 14, 2005
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    Hey, you're just down the road from me. More or less. I used a Chevy column from Centech and used their bracket. If it's a Chevy column you are using, contact Centech for a bracket. If I get a chance I'll send a pic. I'm off the run the Ducy trail down by Fresno Thur so I'm a little pressed for time right now. Plus, I haven't been able to figure out how to attach a full size pic to a reply.
     
    Posimoto, Sep 14, 2005
    #3
New Posts