1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Underseat Toolbox

Discussion in 'Early CJ5 and CJ6 Tech' started by ilovemyjeep, Sep 7, 2005.

  1. Sep 7, 2005
    ilovemyjeep

    ilovemyjeep 1971 CJ-5 w/ Dauntless V6

    Atlanta, Georgia
    Joined:
    Jul 20, 2005
    Messages:
    74
    I guess I better ask before I do, but if I pop the welds on the tool box ont he passenger side to remove it, will it just leave the floor pan like on the drivers side, correct? or will i have huge gaping holes in my floor?
     
    ilovemyjeep, Sep 7, 2005
    #1
  2. Sep 7, 2005
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    yup, if there's a floor to the toolbox it will look like the drivers side... but you wouldn't beasking if there weren't a floor would ya??
     
    gte636p, Sep 7, 2005
    #2
  3. Sep 7, 2005
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Uh...there is *supposed* to be a floor there, but many times it'll be rusted out.
     
    Boyink, Sep 7, 2005
    #3
  4. Sep 7, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    Should look sumthin like this-

    [​IMG]
    H.
     
    Howard Eisenhauer, Sep 7, 2005
    #4
  5. Sep 7, 2005
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    If you look under there and theres a floor there, there is usually a floor there R) R)
     
    gscj5, Sep 7, 2005
    #5
  6. Sep 7, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I think he meant to ask if the floor comes out with the toolbox, or if the toolbox is sitting on top of the floor.
     
    timgr, Sep 7, 2005
    #6
  7. Sep 7, 2005
    ilovemyjeep

    ilovemyjeep 1971 CJ-5 w/ Dauntless V6

    Atlanta, Georgia
    Joined:
    Jul 20, 2005
    Messages:
    74
    yes, what timgr said.
     
    ilovemyjeep, Sep 7, 2005
    #7
  8. Sep 7, 2005
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    I was kidding....jesh! I see...there are no stupid questions, sorry Ilovemyjeep, just teasing. I'll keep my mouth shut :oops:
     
    gscj5, Sep 7, 2005
    #8
  9. Sep 7, 2005
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    missed the smiley face... i was going for what everyone else was... as long as there's a floor to the toolbox now it will look just like the drivers side once the top and sides have been removed.
     
    gte636p, Sep 7, 2005
    #9
New Posts