i need help finding parts!!

i am looking for windshield hinges for a 1967 cj5... and a pitman arm for a 4" lift on the same vehicle... these are the only parts that i am missing for my complete restoration... any help would be greatly appreciated

 

Unless you have converted to saginaw steering, you don't have a pitman arm. If it is Ross type there is no means to drop the linkage, you can flip the tie rods onto the top of the knuckles to gain some advantage.
As far as the windshield hinges you will need to find a used set, as they haven't been made in years. Advance adapters did a special run of them a few years back but that is the only ones i know of.

 

FNJeep in Colorado Springs had a pile of hinges last time I was in there. 719-634-0666. Looks like their website isn't up yet.

 

md juan is making the upper hinge, should be out soon.

 

thanks for the info... fnjeep has the hinges and i am in the process of getting those... thanks again for the help... ill keep yall posted on the progress of my restoration/ construction of my bucket of rust... :v6: