1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone adapter a NP435 or SM465 to a Fhead???

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Aug 26, 2005.

  1. Aug 26, 2005
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Has anyone done this? I looked on Novaks site and it didnt lit anything. Thinking about future projects.
     
    DanStew, Aug 26, 2005
    #1
  2. Aug 27, 2005
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    Ive never heard of one. Would any of the other bell housing work with a little machining? What bell housing do they use on the 420 swap, I would think that would be a good start.I think the input shaft would be the hardest thing to get right.Well if you do it dan I doubt you will meet anyone else on the trail with the same setup ;). Just remember to wait one week before tellico to do it R).
     
    Hawk62cj5, Aug 27, 2005
    #2
  3. Aug 27, 2005
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    oh no.. not for my jeep. just brainstorming
     
    DanStew, Aug 27, 2005
    #3
New Posts