1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spicer PTO

Discussion in 'Early CJ5 and CJ6 Tech' started by Grinsha, Jul 20, 2005.

  1. Jul 20, 2005
    Grinsha

    Grinsha minimally sufficient

    Montana
    Joined:
    Nov 11, 2003
    Messages:
    107
    Grinsha, Jul 20, 2005
    #1
  2. Jul 20, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    Just for the record the parts book numbers are A-10119 for the bearings & A-958 for the rear seal but if you take the old ones to any supply place they'll be able to match them, that's how I got new ones for my PTO & winch.

    FYI here's a website of a rebuild on a ramsey that appears to be a close copy of your Spicer,

    http://www.willystech.com/wt/pto/ramseypt2f/ramseypt2f.htm

    There's also some PTO related info on my website as well.

    Good luck,

    H.
     
    Howard Eisenhauer, Jul 20, 2005
    #2
  3. Jul 20, 2005
    Grinsha

    Grinsha minimally sufficient

    Montana
    Joined:
    Nov 11, 2003
    Messages:
    107
    Thanks for the part numbers.
    Taking the old bearings & seal to any of the local parts houses would be a waste of time. Those idiots cant find anything unless its in the computer or you have a part number.
    Even then they will give you the wrong part half the time.
     
    Grinsha, Jul 20, 2005
    #3
  4. Jul 20, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    I actually meant a bearing supply place, my bad :oops:

    I agree with you about most FLAPS type people, whenever I go into one I try to scope out the "oldtimer-who-knows-it-all" counter guy & position myself to get served by him :).

    H.
     
    Howard Eisenhauer, Jul 20, 2005
    #4
New Posts