1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

clutch parts for 4.3 swap?

Discussion in 'Early CJ5 and CJ6 Tech' started by John O, Jul 9, 2005.

  1. Jul 9, 2005
    John O

    John O Member

    Tewksbury MA
    Joined:
    Sep 22, 2002
    Messages:
    149
    Anyone have a listing of what I'd need to use for a clutch? Swapping a 4.3 to mate up with a T-90.
    Thanks
     
    John O, Jul 9, 2005
    #1
  2. Jul 9, 2005
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    S-10s had manual trans. I'm not shure if a 4.3 is the same as a Chevy 3.8 Clutch, but I got all my part out of a '81 El Cameno.
     
    scott milliner, Jul 9, 2005
    #2
  3. Jul 9, 2005
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    flywheel is different from 3.8 to 4.3. I don't know about the clutch.
     
    mb82, Jul 9, 2005
    #3
  4. Jul 11, 2005
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    Go to Advanced Adapters and their Jeep Clutch Selection Chart. Depending on the size you need (don't know the 4.3, but the 225 is 10 1/2" and the T90 is 1 1/8 - 10 Spline) match it up and you can even shop around for other clutch and p plates to use.
     
    Warloch, Jul 11, 2005
    #4
  5. Jul 12, 2005
    John O

    John O Member

    Tewksbury MA
    Joined:
    Sep 22, 2002
    Messages:
    149
    Cool, Thanks!
    I did and researched the Centerforce part number and came up with a P plate and disk for a 79 GMC 10 pickup with the 3.1. Thats an 11" disk.
    :)
     
    John O, Jul 12, 2005
    #5
New Posts