1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Rod removal

Discussion in 'Early CJ5 and CJ6 Tech' started by tgregg, Jun 25, 2005.

  1. Jun 25, 2005
    tgregg

    tgregg Member

    Oak Hills, CA...
    Joined:
    Apr 14, 2005
    Messages:
    529
    They rod that runs from the frame where it is bolted to the transfer case where it fits over some kind of nipple. I can't find any help on removing it. I unbolted the frame end braket but can't see how the T/C end comes loose. Any help?
    Also what is the opinion on the Advance Adapter clutch linkage upgrade?
     
    tgregg, Jun 25, 2005
    #1
  2. Jun 25, 2005
    lafester

    lafester Sponsor

    loveland, co
    Joined:
    Sep 24, 2002
    Messages:
    260
    if i remember correctly you have to remove the tcase bolt also. be sure to drain the tcase first cause that bolt goes all the way through.

    i like my aa clutch linkage... only way to go other then hydrolic.

    chris
     
    lafester, Jun 25, 2005
    #2
  3. Jun 25, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Not really...
     
    sparky, Jun 25, 2005
    #3
  4. Jun 25, 2005
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Patrick, Jun 25, 2005
    #4
New Posts