1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

U bolts

Discussion in 'Early CJ5 and CJ6 Tech' started by Deputy Dave, Jun 16, 2005.

  1. Jun 16, 2005
    Deputy Dave

    Deputy Dave New Member

    washinton ut
    Joined:
    Apr 6, 2005
    Messages:
    19
    hey i know this is a stupid question but were can i get a set of u bolts for my d 27 ? i can get some made a six states but i would rather just order some. thanks ,dave
     
    Deputy Dave, Jun 16, 2005
    #1
  2. Jun 16, 2005
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Any Napa dealer I have been in carries an assortment or can get them if they don't have them in stock, you must know the size and alot of times they will be long so you must cut them to fit. The factory used 7/16" diameter rod. Just measure the diameter of your axle in the location where they clamp and go to a Napa or local auto parts place.
     
    Mcruff, Jun 16, 2005
    #2
  3. Jun 16, 2005
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    lynn, Jun 16, 2005
    #3
  4. Jun 16, 2005
    67cj5

    67cj5 Member

    Oregon
    Joined:
    Oct 15, 2004
    Messages:
    347
    Not sure where you are located , But I just bought a new set from R&p in Portland oregon. great quality and they are 1/2 inch so they are a little stronger than stock.
     
    67cj5, Jun 16, 2005
    #4
New Posts