1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spring eyelet Q

Discussion in 'Early CJ5 and CJ6 Tech' started by gte636p, Jun 12, 2005.

  1. Jun 12, 2005
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    alright, i'm loking for springs for an m38a1 and i already have a set of bds springs on my 1, and am looking to put them on the a1. there's two problems though. the shackle side of things uses the big ole C style shackle (and it aint getin changed) and the other side of things uses the big bolt/brass bushing method. does anyone know if this setup would work right with the new springs?? it looks like it should, but it's alot to go through just to find out i doesn't quite fit.
     
    gte636p, Jun 12, 2005
    #1
  2. Jun 12, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,381
    Yes it will work. The outside of the female end that the c shackle threads in to is the same diameter as the regular bushing. If you order springs I would tell them you want them for an M38A1 and want to stay with the original C shackle.
     
    Glenn, Jun 12, 2005
    #2
New Posts