Welding Gloves And Sleeves

What are you using? do you like em? Where did you buy em?

 

Gloves-
I use these for 80% of the stuff I do. They are AMAZING.

https://www.amazon.com/SHOWA-370BL-08-Atlas-Nitrile-Coating/dp/B007VRCPC6/ref=mp_s_a_1_4?crid=3GVKTV5FX1WEO&dib=eyJ2IjoiMSJ9.9FW__zff8nnWCIG0eOgk7UBQcDMfz3uxEtVOcT_2qR-ydXTG94sLwwDdxerF78o6e-lokYLb8Vm40KwWFIu_KOdyiJOjKAvhsFmrRXb4fd6_Cimq5rkBv_9iJC1Yv2TdaKyICQvafgkixOMcvmgCjuN1rQdDGtqA_2Le9xHsD046xOnE2kAbugMzUcGIYoJmHfb0NCgYu3ENvyN6peYP8w.zLaeIiaD36DSdlBeN3ltkncS6HDb9pb_8zHHYy6ozQ0&dib_tag=se&keywords=atlas+gloves+large&qid=1711640467&sprefix=atlas+gloves,aps,231&sr=8-4

Their only drawback is that if a single spark hits the back (spandex blend), they get holes in them. So if I’m doing any grinding or welding where sparks will come in contact, I’ll use Harbor Freight’s $7 goatskin gloves OVER them.

Sleeves-
I only wear sleeves when it’s too ungodly hot to wear my leathers. I have a set of Lincoln sleeves that I got free with some purchase. They’re ok. But I prefer my leathers. I use the upper-half-style bib with the apron front rather than the jacket style. It’s easy to put on and take off like a t-shirt. I’ve had the same leathers for 25 years… and they’re gross. Bought at Maine Oxy in New Hampshire.

https://www.amazon.com/Leaseek-Leat...4&psc=1&mcid=e90c0678a10934abac6a3b99e0221fd9

 

Hobart Blue Gloves, split leather; insulated enough, still flexible/pliable for my limited use & I'm usually working something that needs handling/positioning. Mine were a gift but, if the present batch is the same, they are found at Orscheln Farm & Home & TSC, etc.

Vintage J.C. Penny split-leather unlined, snap-up jacket. Usually doesn't get too hot to be worn here in northern MN--along with split-leather britches if needed. All rummage/yard sales finest; couldn't ask for better weight and mobility.