1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Made A Few Modifications

Discussion in 'Builds and Fabricators Forum' started by Renegade ll, Sep 13, 2023.

  1. Sep 13, 2023
    Renegade ll

    Renegade ll Member

    Thayne Wyoming
    Joined:
    Feb 17, 2013
    Messages:
    785
    Rich M. and James O. reccomended I make a few changes to improve my wheelin with them. I had some problems in Colorado Epic. James and Rich suggested I flip my drag link to be parallel with the tie rod so I did. It was an easy fix. I also switched to an inline tube clutch cable. Thanks to Dave (Wheelie) for the original bracket for the transfer case. I made a bracket that I bolted to the frame to hook the other end of the clutch housing to and then connected the cable to the clutch pedal. All I have to do now is adjust the clutch cable and mount my rock sliders when I get them from Kyle. Here are a few pics of the changes.

     
    Renegade ll, Sep 13, 2023
    #1
    Buildflycrash, colojeepguy, Norcal69 and 10 others like this.
  2. Sep 13, 2023
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,652
    you are ready for HITR!....those elk you have a tag for will be there next year
     
    FinoCJ, Sep 13, 2023
    #2
    colojeepguy, Renegade ll, Fireball and 1 other person like this.
  3. Sep 13, 2023
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,380
    What type of linkage did you have before the clutch cable?
     
    homersdog, Sep 13, 2023
    #3
  4. Sep 13, 2023
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,200
    Nice! I think you'll be much happier.
     
    Rich M., Sep 13, 2023
    #4
  5. Sep 14, 2023
    Renegade ll

    Renegade ll Member

    Thayne Wyoming
    Joined:
    Feb 17, 2013
    Messages:
    785
    I had a bell crank and rod to the clutch fork. From the clutch pedal to the bell crank there were 2 metal pieces of flat stock. Its was pretty stiff.
     
    Renegade ll, Sep 14, 2023
    #5
    homersdog likes this.
  6. Sep 14, 2023
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,628
    Those are all great changes for your Jeep.
     
    Buildflycrash, Sep 14, 2023
    #6
New Posts