1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch adjustment

Discussion in 'Early CJ5 and CJ6 Tech' started by dohc281, May 27, 2005.

  1. May 27, 2005
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    The othe night the chain linkage for the clutch broke. I figured no big deal. I replaced the chain with thicker chain and hooked it up. Now the pedal engages at the floor whereas before it was at the top. How do I adjust the clutch to compensate for this? Right now the trans grinds when I try to put it in first and didn't before.
     
    dohc281, May 27, 2005
    #1
  2. May 27, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    isn't there an adjustment ball at the t/o fork?
     
    jpflat2a, May 27, 2005
    #2
  3. May 27, 2005
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    :cry: I figured it out. On my test run afterwards the rear drive shaft fell out. I had to remove it on the side of the road and drive home with the front wheels engaged. The last three times out the exhaust system fell off, the clutch chain linkage broke and tonights adventure.
     
    dohc281, May 27, 2005
    #3
New Posts