1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear Seat Belt Anchor Points

Discussion in 'Early CJ5 and CJ6 Tech' started by TigerShark, May 9, 2005.

  1. May 9, 2005
    TigerShark

    TigerShark Sponsor

    St. Louis, MO
    Joined:
    May 27, 2004
    Messages:
    333
    I have what I believe is a '75 tub on my '69. The old rear deck had 2 rear seat belt anchors in the deck (towards the center), which I reclaimed for my new replacement, but there aren't any for the second half of the belt. I believe the newer CJ's had the anchors mounted down low on the wheelhouse. Does anyone else have them there? If so, would it be possible to get some measurements? I would like to keep the kiddos safe in the back seat once this thing is rolling, but I don't want it in the way of the seat either..

    Thanks,

    Jim
     
    TigerShark, May 9, 2005
    #1
  2. May 10, 2005
    AKCJ

    AKCJ Active Member

    Fairbanks, Alaska
    Joined:
    Aug 12, 2003
    Messages:
    1,035
    My rear seat seat belts are attached to the seat frame which is bolted to the floor.
    I'm wondering if you ran a bolt through the inside vertical wall of the wheel house, wouldn't the bolt interfer with the tire when the tire is up (suspension compressed)?
     
    AKCJ, May 10, 2005
    #2
  3. May 10, 2005
    Worth

    Worth Ex Farm Hand

    Charlotte, NC
    Joined:
    Nov 27, 2002
    Messages:
    71
    Mine are are factory original and all the way to the back at the bottom of the wheel housing. They're well out of the way of the tires.
     
    Worth, May 10, 2005
    #3
  4. May 10, 2005
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    My 71 has 2 anchor plates in the rear floor just as you describe.
     
    Project71-5, May 10, 2005
    #4
New Posts