1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transfer Case Shifting Forks D18

Discussion in 'Early CJ5 and CJ6 Tech' started by EDDY ARNOLD, Apr 14, 2021.

  1. Apr 14, 2021
    EDDY ARNOLD

    EDDY ARNOLD Member

    71655
    Joined:
    Apr 6, 2021
    Messages:
    76
    Where to find dimensions of dana 18 transfer case. My clearance was around .020 too much but is it forks or gears?
    Nothing listed in factory repair manual.
    Novac kit said .008?
     
    EDDY ARNOLD, Apr 14, 2021
    #1
  2. Apr 14, 2021
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,522
    You would have to have a LOT of slop in shifting forks for them not too work. I would just use what you have.

    The rear output end play I believe is speced at .004-.008".
     
    duffer, Apr 14, 2021
    #2
  3. Apr 14, 2021
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,801
    I rebushed my shift arms and made a new shift pin, but only because I could.. For them not to work.. I'm not sure you can wear then out that bad.
     
    47v6, Apr 14, 2021
    #3
New Posts