1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

L134 Carb Bolt Size

Discussion in 'Early CJ5 and CJ6 Tech' started by matt johnson, Mar 30, 2021.

  1. Mar 30, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Can someone please furnish me with the exact bolt size for carb to intake. Thanks.
     
    matt johnson, Mar 30, 2021
    #1
  2. Mar 30, 2021
    Mr Vaughan

    Mr Vaughan

    is that the same as F head?
     
    Mr Vaughan, Mar 30, 2021
    #2
  3. Mar 31, 2021
    scoutpilot

    scoutpilot Member

    Asheboro, NC
    Joined:
    Jun 7, 2014
    Messages:
    431
    scoutpilot, Mar 31, 2021
    #3
  4. Mar 31, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Yes.
     
    matt johnson, Mar 31, 2021
    #4
  5. Mar 31, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    matt johnson, Mar 31, 2021
    #5
  6. Mar 31, 2021
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Spokane Valley, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,692
    I can check in a few hours, but IIRC, the threads into the manifold are 3/8-16, and the nut threads are 3/8-24.
     
    ITLKSEZ, Mar 31, 2021
    #6
    Rick Whitson likes this.
  7. Mar 31, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Much appreciated.
     
    matt johnson, Mar 31, 2021
    #7
  8. Mar 31, 2021
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    ITLKSEZ is correct on the size and thread pitches.
     
    Glenn, Mar 31, 2021
    #8
    matt johnson and ITLKSEZ like this.
  9. Mar 31, 2021
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Spokane Valley, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,692
    Thanks Glenn, I’d normally be in the shop by now, but I’m off to get my second shot. (y)
     
    ITLKSEZ, Mar 31, 2021
    #9
    dozerjim, Fireball, Glenn and 1 other person like this.
  10. Mar 31, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Great. Many thanks. Jeep is a 2 hrs from me. Huge help!
     
    matt johnson, Mar 31, 2021
    #10
    Glenn likes this.
  11. Mar 31, 2021
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    Yep, shot is definitely much more important. :) It's funny with our memories, I knew that it takes a 9/16th wrench but I had to go verify it anyway. In this case, not a heavy duty over size nut, that equates to 3/8 bolt or stud size.
     
    Glenn, Mar 31, 2021
    #11
    Rick Whitson, dozerjim, matt johnson and 1 other person like this.
New Posts