1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

m38a1 d25 angle measurement

Discussion in 'Early CJ5 and CJ6 Tech' started by fivos, May 4, 2005.

  1. May 4, 2005
    fivos

    fivos Member

    Athens, Greece
    Joined:
    Jun 27, 2003
    Messages:
    109
    I know that there are a lot references for the front end angles but i'm really confused. So what i'm asking is if anybody knows the stock angles for the front end of an m38a1.

    caster
    camber
    toe in-out
     
    fivos, May 4, 2005
    #1
  2. May 4, 2005
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    :? Why. Did you change the stock set up? All as you need is to set the toe. The rest isn't adjustable...Well maybe caster with a shim.
     
    scott milliner, May 4, 2005
    #2
  3. May 4, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    D25 and D27 should be the same, regardless of Jeep model
    caster : 3*
    camber : 1* 30'
    toe in : 3/32" to 3/64"
     
    jpflat2a, May 4, 2005
    #3
  4. May 5, 2005
    fivos

    fivos Member

    Athens, Greece
    Joined:
    Jun 27, 2003
    Messages:
    109
    thanks. i just want to measure my angles to see what is going on with the steering
     
    fivos, May 5, 2005
    #4
New Posts