1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Been Looking Local For A 2 Hole Knuckle For A While.....

Discussion in 'Early CJ5 and CJ6 Tech' started by Richard in AZ, Nov 6, 2020.

  1. Nov 6, 2020
    Richard in AZ

    Richard in AZ I just don't understand the like of patina

    PHX AZ
    Joined:
    Feb 22, 2016
    Messages:
    142
    Finally found one on craigslist. Nice gent had front, rear axles and trans-transfer case from a 60s era Wagoneer. Told him all I was interested in was the 2 hole knuckle and was willing to pay a fair price. He said it was an all or none deal.......and if I took all the pieces I can have them for free.

    Finally a GOOD day!

    [​IMG]

    [​IMG]
     
    Richard in AZ, Nov 6, 2020
    #1
    Tom_Hartz, Twin2, boopiejones and 1 other person like this.
  2. Nov 6, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Should be 11" Bendix brakes, valuable as conversion material. A Dana 20 has some value. They aren't as plentiful as they were a decade ago, but likely someone will want it if you price it right. Keep the transmission output gear with it. Transmission is a side-shift T-89, I'm guessing. I'd put it up on the Wagoneer forums and see if anyone bites - unlikely. The rest of it is not much to speak of. Maybe the rear axle has a PowrLock - look inside. The front axle is a wide Dana 27, not much value especially without the knuckle.
     
    timgr, Nov 6, 2020
    #2
New Posts