1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need help from another '2A guy

Discussion in 'Early CJ5 and CJ6 Tech' started by w3srl, Apr 28, 2005.

  1. Apr 28, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Help!

    I'm trying to put the driveline e-brake assembly back in service and I just discovered that the shiney new cable I bought many moons ago is the wrong one. My handle is set up to handle just the ball-end of the cable, and my new cable has a sleeve on it that looks just like the end of the stock handle.

    Anyone else run into this?
     
    w3srl, Apr 28, 2005
    #1
  2. Apr 28, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    yep
    the early models up until Ser# 183498 used a snout (sleeve) on the end of the cable that fit over the handle; a cotter pin held them together thru a hole in the shaft.
    the later or after Ser# 183498 used the ball end style
    P/N 640353 is for the early snout type
    P/N 646142 is for the later ball end style
    hth

    edit: I show 1 of each in inventory
    pm if interested
     
    jpflat2a, Apr 28, 2005
    #2
  3. Apr 28, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Wow, thanks Jim! PM on the way...
     
    w3srl, Apr 28, 2005
    #3
New Posts