1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

How To Remove E-brake Drum On Dana 18

Discussion in 'Early CJ5 and CJ6 Tech' started by Big_Rob2020, Aug 6, 2020.

  1. Aug 6, 2020
    Big_Rob2020

    Big_Rob2020 Member

    New Braunfels, TX
    Joined:
    Jul 29, 2020
    Messages:
    74
    Hey guys, I'm sure one of you knows this. Is there a trick or technique to pulling the E-brake drum cover off of the output shaft on the Dana 18 T-case. I'm about to get into a rebuild here and I can't seem to get any of my pullers to work for this application. Any help is appreciated
     
  2. Aug 6, 2020
    Twin2

    Twin2 not him 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,204
    I've always just used my small two jaw puller under two of the ears on yoke
     
  3. Aug 6, 2020
    iharding

    iharding Quitter

    Tacoma, WA
    Joined:
    Feb 24, 2013
    Messages:
    344
    I use a steering wheel puller on the yoke. It's kind of a funny arrangement how it's behind the yoke but it works. The bolt heads are held steady by a groove they sit in.
     
  4. Aug 6, 2020
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    938
    I remember it being a chore but don't remember exactly how it all came off. Mine was so crusty is was unusable.
     
New Posts