1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

t-98 input shaft dimensions

Discussion in 'Early CJ5 and CJ6 Tech' started by kamel, Apr 21, 2005.

  1. Apr 21, 2005
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    I'm looking for some dimensions on the T-98 input shaft for an F-134 application.

    If anyone has a T-98 that is currently not installed I'd be interested in getting some dimensions from it.

    Now, I won't ask you to take the transmission apart, I think we could get all necessary dimensions from an assembled unit.

    If you do have one that is apart, that would be even better, but not necessary.

    thanks

    kamel
     
    kamel, Apr 21, 2005
    #1
  2. Apr 21, 2005
    m38willys

    m38willys Jeep Vice 2024 Sponsor

    Green Cove...
    Joined:
    Sep 30, 2002
    Messages:
    690
    The tip, where the pilot bushing rides is .631. Erik Novak has those dimensions. I called him a few years back to get them and he helped me out.
     
    m38willys, Apr 21, 2005
    #2
  3. Apr 22, 2005
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    Here's info from my AA catalog:
    OAL tranny case length: 11.87"
    Input shaft length, from outer front face of tranny case to tip:10.75"
    Tip diameter, two available: .625" or .670"
    Tip depth: 1"
    Splines: 1 1/16" - 10 spline
    Front bearing retainer diameter: 4.87"
    Output shaft: 1 3/8" 6-spline

    HTH
     
    lynn, Apr 22, 2005
    #3
New Posts