1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can somebody verify this Yoke

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Apr 10, 2005.

  1. Apr 10, 2005
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    When i was putting my Dana 20 back together, i was looking at the yoke that was on it, i didnt really look at it before because the Tcase was just sitting in my parts bin. It looks to be that this is a CV yoke. Can somebody verify this for me? The botls are captured in there, they do not come out because they hit the dist shield. It does seem cut like the CV yoke i got from Tom Woods, but this would be a nice bonus for me to have an extra yoke on hand.
     
    DanStew, Apr 10, 2005
    #1
  2. Apr 10, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    that's what it appears to be Dan
    The FSJ Q-Tracs used a yoke on the front output like that, captured bolts
    early ones were 10 spline
    later (mid 78 I think) changed to 26 spline
    the Q-Trac FSJs used a front CV shaft set-up
    I don't think that style of yoke ever showed on a D20, but I could be wrong
    that doesn't mean that you can't use it for your purpose either !
     
    jpflat2a, Apr 10, 2005
    #2
  3. Apr 10, 2005
    oldjeep

    oldjeep Sisyphus at work

    Victoria, MN
    Joined:
    Sep 19, 2003
    Messages:
    267
    That's a CV yoke. You also find them on the front output of D20's from J trucks. I've got several of them that way. I use them on the rear output of my D18.
     
    oldjeep, Apr 10, 2005
    #3
  4. Apr 10, 2005
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Thanks Guys!! That makes sense. If i remember, the guy i got all my T18 and dana 20 from said it was from a Jtruck, i have the Jtruck shifter also and te CJ version that i am using. So thats a good little find for me :)
     
    DanStew, Apr 10, 2005
    #4
New Posts