1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flanged Axle Studs?

Discussion in 'Early CJ5 and CJ6 Tech' started by justin_bongo, Nov 1, 2018.

  1. Nov 1, 2018
    justin_bongo

    justin_bongo Member

    Pampa, TX
    Joined:
    Oct 8, 2014
    Messages:
    94
    Anyone know the right part number for studs for a 71 flanged 44?
    Rockauto has them as 1/2-20, .618" knurl.
    Either my axle holes are blown out by PO, or thats wrong.

    Thanks in advance.
    Justin
     
    justin_bongo, Nov 1, 2018
    #1
  2. Nov 1, 2018
    TIm E

    TIm E Aggressively average

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    683
    I am sure someone will chime in about the flanged axles, but those are correct for typical early CJ's (fronts and tapered rear).

    If you do end-up needing larger knurls, there is a sizing chart on Dorman's website that allows you to filter (in Excel) by thread size, knurl, etc. Lots of options...

    Dorman Products - Wheel Hardware
     
    TIm E, Nov 1, 2018
    #2
New Posts