1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

t 18- d 18

Discussion in 'Early CJ5 and CJ6 Tech' started by goober, Mar 13, 2005.

  1. Mar 13, 2005
    goober

    goober Banned

    central Pa
    Joined:
    Mar 10, 2005
    Messages:
    123
    i recently purchased a t 18 tranny with the short input shaft with a d 20, the t 18 has the correct adapter to mount the dana 20, i also have a large hole dana 18 that was used with my t14. will the t 18 mount with my dana 18 without having to buy another adapter???
     
    goober, Mar 13, 2005
    #1
  2. Mar 13, 2005
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,586
    As long as it has the Dana 20 adapter, then you are good to go. i have the same setup. Just use the bullgear from the Dana 18 to what tranny it was hooked up to. If you had a T14 for an original tranny then you may need a new bull gear. I think the T14 didnt have a 6 spline bullgear.
     
    DanStew, Mar 13, 2005
    #2
New Posts