1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Has Anyone Put A Motorcraft 2100 On A Dauntless

Discussion in 'Early CJ5 and CJ6 Tech' started by masscj2a, May 25, 2017.

  1. Jun 7, 2023
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,569
    Its whatever a guy likes.
    IMO you would be better off with a 4bbl on your Buick 215 rather than any 2bbl, aside from EFI. Buick 215 would be better served by a 4bbl intake and Holley 390 carb.
     
    vtxtasy likes this.
  2. Jun 7, 2023
    oblvnnwtnjhn

    oblvnnwtnjhn Member

    North Alabama
    Joined:
    Aug 30, 2021
    Messages:
    105
    going for torque with D &D cam, custom exhaust. I'll post some dyno results Thanksgiving....... ;-) :D
     
  3. Jun 7, 2023
    Rumble bee

    Rumble bee New Member

    Visalia Ca
    Joined:
    Jan 8, 2022
    Messages:
    9
    I've already got the mc2100 due to budget and just trying something smaller then the 600cfm holly i have currently. I'm kinda at a loss where vac advance hooks up.
     
    oblvnnwtnjhn likes this.
  4. Jun 7, 2023
    SFaulken

    SFaulken Active Member

    Bellevue, WA
    Joined:
    May 24, 2011
    Messages:
    1,178
    The ported vacuum on a 2100/4100 is usually just above the butterflies, I *think* (and my memory might be a bit rusty) it should be sticking out of the side of the carb, near the stud that points at the #1 cylinder on a Ford. (Passenger Side Front Cylinder)
     
    Rumble bee likes this.
  5. Jun 8, 2023
    jeepdaddy2000

    jeepdaddy2000 Active Member

    Eagle Point oregon
    Joined:
    Jun 24, 2004
    Messages:
    1,165
    [​IMG]
     
  6. Jun 8, 2023
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,156
    My plain ol' Rochester 2G has stood to every angle I could get it into and never missed. I'd have a tough time getting away from it..
     
    68CJ-5 and oblvnnwtnjhn like this.
  7. Jun 8, 2023
    Rumble bee

    Rumble bee New Member

    Visalia Ca
    Joined:
    Jan 8, 2022
    Messages:
    9
    Exactly what i needed thank you
     
    oblvnnwtnjhn likes this.
New Posts