1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

headers for a f134

Discussion in 'Early CJ5 and CJ6 Tech' started by katdavar, Mar 11, 2005.

  1. Mar 11, 2005
    katdavar

    katdavar New Member

    Pittsburgh, PA
    Joined:
    Feb 27, 2005
    Messages:
    17
    ok so I read the f134 upgrade fact but the sight listed as to where to get the headers doesn't seem to have a damn thing for an f134. Anyone put headers on theirs lately, where did you get them. How much did they run and so forth.
     
    katdavar, Mar 11, 2005
    #1
  2. Mar 11, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Clifford is the only place I know of that would have such a beast unless you build your own.
     
    sparky, Mar 11, 2005
    #2
  3. Mar 11, 2005
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,190
    I called Clifford about a year ago. They had a set on the shelf they'd sell me for $249.00. IIRC . I got one in a parts swap about 6 mos ago, haven't put it on yet.Need to sandblast and paint it. They are out there, I've seen 'en on Ebay.
     
    SIDSCJ, Mar 11, 2005
    #3
  4. Mar 11, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    Keep in mind.you dont want to overdue the free flowing exhaust idea on an Fhead....it needs some back pressure........
     
    blevisay, Mar 11, 2005
    #4
  5. Mar 11, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Mar 11, 2005
    #5
  6. Mar 11, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    I went with 2" exhaust systems and stock manifolds. Seemed to run a bit better.
     
    Glenn, Mar 11, 2005
    #6
  7. Mar 11, 2005
    Griff

    Griff Member

    Sylacauga ,Alabama
    Joined:
    Oct 11, 2004
    Messages:
    66
    Glenn I have a 60 with an F-134 . How much did your 2 inch exhaust cost and what type of muffler did you use?
     
    Griff, Mar 11, 2005
    #7
  8. Mar 11, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    Seems like I paid around $150, bent like I wanted it, aluminized pipe. Told them I wanted the quietest muffler they had, didn't want any kind of turbo deal. Oval I guess you'd say, definitely not round. Had both CJs done the same.
     
    Glenn, Mar 11, 2005
    #8
  9. Mar 11, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    If you look close at my Avatar you can actually see where the mufflers at, under the driver floor, outside the frame. The picture is reversed, so that's not the passenger side it's the drivers' side.
     
    Glenn, Mar 11, 2005
    #9
  10. Mar 11, 2005
    Griff

    Griff Member

    Sylacauga ,Alabama
    Joined:
    Oct 11, 2004
    Messages:
    66
    Thanks, been kicking around the idea of a clifford header and new exhaust. I think I will stay stock with manifold and go with a little bigger exhaust like you did.
     
    Griff, Mar 11, 2005
    #10
New Posts