1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Front Frame/motor Mount

Discussion in 'Early CJ5 and CJ6 Tech' started by AtomicYJ, Oct 6, 2016.

  1. Oct 6, 2016
    AtomicYJ

    AtomicYJ Sponsor

    Everson, WA
    Joined:
    May 12, 2015
    Messages:
    69
    I was wondering if anyone had good pictures of the front frame horns on a '71 V6 CJ-5 that showed what the stock holes are supposed to be on the top and side of the frame rails. I was also wondering if anyone had pictures of the drivers side V6 motor mount as mine has had a large hole torched in it.

    Thanks,

    Danny
     
  2. Oct 6, 2016
    Framer Mike P

    Framer Mike P Member

    Hopkinton, NH
    Joined:
    Jan 4, 2016
    Messages:
    214
    I do not have any pictures but do know they come with several holes. The hole through the motor mount was most likely made for the steering shaft on a saginaw conversion.
     
  3. Oct 6, 2016
    AtomicYJ

    AtomicYJ Sponsor

    Everson, WA
    Joined:
    May 12, 2015
    Messages:
    69
    The hole in the motor mount was from a poorly done saginaw conversion, but I'm putting the jeep back to stock and would like to have it repaired.
     
  4. Oct 6, 2016
    Framer Mike P

    Framer Mike P Member

    Hopkinton, NH
    Joined:
    Jan 4, 2016
    Messages:
    214
    The two 1955 frames I have had each have three holes on top of each front frame horn and two larger ones in the side of each. I also have a v6 mount to repair.
     
New Posts