1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Motor Mounts

Discussion in 'Intermediate CJ-5/6/7/8' started by publius, Mar 2, 2005.

  1. Mar 2, 2005
    publius

    publius New Member

    Mississippi
    Joined:
    May 1, 2004
    Messages:
    9
    I have a '75 Cj5 and the engine out of a '84 Cj8. The 4cyl AMC 150. Does anyone know where i can get motor mounts for this conversion? Thanks for the help.
     
    publius, Mar 2, 2005
    #1
  2. Mar 4, 2005
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    Try Novak: http://www.novak-adapt.com/ I'd call them, you can get the number from their site. You'll find them to be very helpful and knowledgeable.
     
    Posimoto, Mar 4, 2005
    #2
  3. Mar 4, 2005
    publius

    publius New Member

    Mississippi
    Joined:
    May 1, 2004
    Messages:
    9
    thanks posimoto, I'll give them a try. This jeep is costing me a hell of a lot more than I bargained for!
     
    publius, Mar 4, 2005
    #3
  4. Mar 5, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Hi publius - you understand that the AMC 150 was never offered by Jeep until 1984? Most times swapping Jeep engines into Jeep vehicles from different eras isn't easy. It'd be a lot easier to use a 232 or 258 6 cylinder than the 150 in that Jeep. The 232 and 258 are widely available and cheap to buy and repair.
     
    timgr, Mar 5, 2005
    #4
  5. Mar 13, 2005
    publius

    publius New Member

    Mississippi
    Joined:
    May 1, 2004
    Messages:
    9
    Yeah, I know Timgr, but I have the engine already and it runs great and does not have many miles on it.
     
    publius, Mar 13, 2005
    #5
  6. Mar 13, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    Motor mounts from engine and the jeep it came out of won't work? Or can't be adapted for use?
     
    jd7, Mar 13, 2005
    #6
New Posts