1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hy low pump pulley?

Discussion in 'Early CJ5 and CJ6 Tech' started by mayday, Mar 3, 2016.

  1. Mar 3, 2016
    mayday

    mayday Sponsor

    Joined:
    Apr 20, 2013
    Messages:
    222
    Hello all,I picked up a Hy lo pump 2 weeks ago and I'm rebuilding it right now, my Question is the double pulley for the generator is the one part I don't have. From what I've read the 2 groove pulley on a military generator is different? and does anyone just run the pump from the crank or ? My 1958 is all stock trying to keep it that way. Thanks in advance.
     
    mayday, Mar 3, 2016
    #1
  2. Mar 3, 2016
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Not sure on the military pulley. Ive got the 2 groove pulley on mine. I have/had a single pulley generator and know the pulleys just unbolt and can be swapped around
     
    termin8ed, Mar 3, 2016
    #2
  3. Mar 3, 2016
    mayday

    mayday Sponsor

    Joined:
    Apr 20, 2013
    Messages:
    222
    I've been looking for a 2 grove pulley haven't found one yet. Was seeing if anyone has a different pulley set up.
     
    mayday, Mar 3, 2016
    #3
  4. Mar 3, 2016
    Unkel Dale

    Unkel Dale delivery on my Jeep from Ft. Campbell, Ky.

    Pittsburgh, Pa.
    Joined:
    Feb 3, 2013
    Messages:
    692
    Single pulley set up ONLY to my memory
     
    Unkel Dale, Mar 3, 2016
    #4
  5. Mar 4, 2016
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,732
    When I got my Jeep, the front groove, the wide one, drove the hydraulic pump for the plow and the back groove drove the water pump and the generator.
     
    Rick Whitson, Mar 4, 2016
    #5
  6. Mar 4, 2016
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Never seen one powered from crank but you probably could if the belt clears the water pump and fan. Only issue i see with it is it would want to pull the hylo pump to the side i would think. Using the generator pulley you dont have any diagonal forces to pull it sideways
     
    termin8ed, Mar 4, 2016
    #6
  7. Mar 4, 2016
    mayday

    mayday Sponsor

    Joined:
    Apr 20, 2013
    Messages:
    222
    Okay cool, I was wondering if I could buy a military two groove pulley and use it, I thought I read they were different but not sure.
     
    mayday, Mar 4, 2016
    #7
New Posts