1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

"Y" pipe on a 225 conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by 3b a runnin, Oct 11, 2015.

  1. Oct 11, 2015
    3b a runnin

    3b a runnin Active Member 2023 Sponsor 2022 Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    1,301
    I'm nearly to the point of installing a y pipe on my 56 cj6. It started life with a f 134, now has a 225 oddfire. I will be using a front dump man. on the driver side. Is there a factory made "Y" pipe available or is this a build it your self item? I have installed the R&P wildwood dual mc. I'M running the t90 & d18 if it matters. any help much appreciated.
     
  2. Oct 11, 2015
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,691
    An option...Waldron's exhaust has or can make it. I talked to them - very helpful and knew exactly what I wanted, but I was able to have a local shop bend it for about the same cost and went that direction.

    http://www.waldronexhaust.com/
     
  3. Oct 12, 2015
    army grunt

    army grunt Member

    Georga USA
    Joined:
    Feb 21, 2012
    Messages:
    269
    I used the pipes Waldron's exhaust ! Good people an the system was spot on! I recommend them...
     
  4. Oct 12, 2015
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,201
    Just for reference, This is the factory Y pipe off my 1970 :v6:

    ~[​IMG][/URL
     
  5. Oct 12, 2015
    BJHitson60

    BJHitson60 Member

    San Rafael, CA
    Joined:
    Nov 20, 2009
    Messages:
    214
    Agree - the Waldron's exhaust work well. I did manage to find a NOS Jeep y-pipe a number of years ago. However, I have not seen one since.
     
New Posts