1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

oil pressure sending unit socket size

Discussion in 'Early CJ5 and CJ6 Tech' started by WadeS, Aug 27, 2015.

  1. Aug 27, 2015
    WadeS

    WadeS Member

    Joined:
    Nov 7, 2013
    Messages:
    97
    Hey guys,
    I have tried a few,nothing seems to fit .It feels/looks like it would be a 15/16ths.
    Little buggers in there good.
    Cheers Wade
     
    WadeS, Aug 27, 2015
    #1
  2. Aug 27, 2015
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    I am going to guess that you are talking about one of the V-6 engines, because the F-head 134 uses a mechanical gauge.
     
    1960willyscj5, Aug 27, 2015
    #2
  3. Aug 27, 2015
    WadeS

    WadeS Member

    Joined:
    Nov 7, 2013
    Messages:
    97
    Yes .sorry forgot to mention that
     
    WadeS, Aug 27, 2015
    #3
  4. Aug 27, 2015
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,694
    I used the closed end of a 1" box wrench, it fit but barely. You have to hold it on with some pressure. They are not meant to be super tight. A pair of channel locks will work to
     
    Johns1967CJ5, Aug 27, 2015
    #4
  5. Aug 27, 2015
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    There is a special sending unit socket - search for KD 2569. Fits 1" or 1 1/16" switches. New supplier is GearWrench it seems (another Danaher company).
     
    timgr, Aug 27, 2015
    #5
New Posts