1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

where can i find a starter drive for my cj5 huricane?

Discussion in 'Early CJ5 and CJ6 Tech' started by friendxconnect, Jan 15, 2015.

  1. Hi from France,
    my starter drive is brocken, next week i will be in chicago. where can i find this spare part?
    thank you for your help
    bruno
     
  2. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    If its for the F-head, you're going to need to order it. No place is going to have it in stock. Maybe you can have it shipped to your hotel, if thats where you are going?
     
  3. Pack Rat

    Pack Rat Old Timer

  4. Glenn

    Glenn Kinda grumpy old man Staff Member

    I read your post as saying you need the drive part, but not the whole starter, is that correct?
     
  5. Alan28

    Alan28 Well-Known Member 2022 Sponsor

    We have good rebuilders in France, for electric parts too. Maybe it is the solution.
     
  6. 1960willyscj5

    1960willyscj5 Well-Known Member

    Rock Auto, maybe?
     
  7. Pack Rat

    Pack Rat Old Timer

    When I was looking for a drive for mine I was looking in the $75 range from Walchs or Kaiser Willys. Got the whole Toyota starter for under $50.
     
  8. Yes i can have it shipped at the hotel in chicago
     
  9. So Pack rat where can i find a toyota starter
    In chicago for less than 50 $
     
  10. Pack Rat

    Pack Rat Old Timer

    I got mine at Rock Auto and being in Canada and only an hour from the border had it sent to my shipping address in Michigan so shouldn't be a problem for them to send it to your hotel. I was just over there checking them out and they've gone up to around $55 plus shipping. $17 or so of that is core charge which I didn't worry about.
     
  11. 1960willyscj5

    1960willyscj5 Well-Known Member

    What happens at Customs when you try to carry that home?
     
  12. 1960willyscj5

    1960willyscj5 Well-Known Member

    I think I would check with Toyota dealers in France before trying to bring one back from the US on an international flight.
     
  13. thanks every body for your help!
    at the end i order for a starter drive for $45 and $10 for shipment.
    i have got the part in time.
    still have a probleme with this part: i turn it to make apears the pin hole and now it is blocked open is it normal?
    [​IMG]
     
  14. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Yep that is normal. It takes the engine running to throw the drive back.
     
  15. ok so i just have to mount it like that?
     
  16. Glenn

    Glenn Kinda grumpy old man Staff Member

    Since it is sticking out you might have trouble getting it mounted because it will be trying to mesh with the flywheel teeth. I recently fixed the one on my wagon and I had a shop spin it back before I installed it.
     
  17. can i do someting by myself to get it close?
     
  18. Glenn

    Glenn Kinda grumpy old man Staff Member

    I personally don't know how, that's why I took it to the shop. I would imagine if you can get it installed it should work as Walt said. I was just mentioning that you might have trouble getting it to line up to make you aware of that.