Which end is the Front?

hey all-

finally got an excellent 76+ frame to replace my 75- below frame for the JEEP...

bought the Pro Comp 4" leaf lift to go on it, but I have a question...

please don't take me to the town square and put me in the stockade for asking such a dumb question...

on the kit, the springs have bushings already installed... one end has sleeves, one end does NOT... does anyone know which end goes toward the FRONT of the vehicle (sleeve or no sleeve?)

does anyone know why there are sleeves in one end and not the other?

I know the 2.5s go in the rear... just not sure about the other...

TIA!

:easy rider:

 

No sleeves in the center of the bushing? I would think that the sleeve end goes to the fixed point and then when assembling the
shackle end, a bolt with another loose sleeve? Any extra sleeve in the parts packages?

 

that's what I was thinking too middle....

in my over-zealous-ness, I failed to look in the box...

nope they're not in there...

I got shims, U bolts and stuff, but no 2nd set of sleeves...

 

sleeves on fixed end Ive seen shackle ends with out

 

ok... thanks!

I'm gonna call them anyway and see whats up... probably OK, I just want to make sure

thanks again!