1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

PCV Valve Location ?

Discussion in 'Intermediate CJ-5/6/7/8' started by Rollbar, Jul 12, 2013.

  1. Jul 12, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    Is this the PCV Valve at the bottom of this hose on the intake?

    '74 CJ5 304v8.

    I pulled on it but it wouldn't budge. I don't want to break it off and let it fall into the intake.

    Thanks,
    Jim

    [​IMG]

    The one in the middle:
    [​IMG]


    Sent from my iPhone 4S
     
    Rollbar, Jul 12, 2013
    #1
  2. Jul 12, 2013
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Yes. It will come out.
     
    timgr, Jul 12, 2013
    #2
  3. Jul 12, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    Thanks, thought so but I also thought I better ask. :)
     
    Rollbar, Jul 12, 2013
    #3
  4. Sep 11, 2013
    cm10223

    cm10223 New Member

    Augusta, GA
    Joined:
    Sep 10, 2013
    Messages:
    5
    I am having trouble removing mine as well. Is the gasket supposed to come out with it??
     
    cm10223, Sep 11, 2013
    #4
  5. Sep 11, 2013
    OleBlue

    OleBlue Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    The valve and grommet are separate.
     
    OleBlue, Sep 11, 2013
    #5
  6. Sep 11, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    Yes, they are seperate-I just pulled on it and it came out.
     
    Rollbar, Sep 11, 2013
    #6
  7. Sep 12, 2013
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Lube it up with WD-40, PB Blaster, Silicone Spray, whatever, and wiggle it around. Should come out. You don't want to rip up the grommet if you don't have too.
     
    timgr, Sep 12, 2013
    #7
New Posts