1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

steering plate drawing-old site??

Discussion in 'Intermediate CJ-5/6/7/8' started by Texis, Jun 11, 2013.

  1. Jun 11, 2013
    Texis

    Texis Member

    Joined:
    Feb 21, 2011
    Messages:
    185
    On the old site there was an article about converting to a Saginaw power steering. In the tech article there was a drawing for fabricating the frame / pump mounting plate.

    Q: Does anyone have this drawing??... or know where to find it??

    Thanks
     
    Texis, Jun 11, 2013
    #1
  2. Jun 17, 2013
    piffey263

    piffey263 Active Member

    Medford, OR
    Joined:
    Oct 16, 2008
    Messages:
    1,214
    On the old site, I believe it was Mcruff

    Look under build section for Saginaw steering pictures, it should be still there.
     
    piffey263, Jun 17, 2013
    #2
  3. Jun 23, 2013
    Texis

    Texis Member

    Joined:
    Feb 21, 2011
    Messages:
    185
    Thanks, I figured out how to do this. Install four 3" bolts and screw them in to level, sit it on a piece of cardboard and scribe around the bolt heads. This lays out the odd ball pattern. Transfer to the plate and your done. I haven't built it as yet, but it should be simple enough now that I have a method.
     
    Texis, Jun 23, 2013
    #3
New Posts