1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pic Request- Wiring Harness

Discussion in 'Early Jeep Restoration and Research' started by Howard Eisenhauer, Apr 27, 2013.

  1. Apr 27, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,130
    Can someone take a picture of the stock wiring harness arrangement/routing where the dash/firewall harness connects to the chassis harness down by the steering box/ master cylinder?

    Thanks,

    H.
     
    Howard Eisenhauer, Apr 27, 2013
    #1
  2. May 8, 2013
    1955CJ-5

    1955CJ-5 Member

    Boise, Idaho
    Joined:
    Jul 15, 2012
    Messages:
    330
    Not the greatest picture..

    [​IMG]
     
    1955CJ-5, May 8, 2013
    #2
  3. May 9, 2013
    ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    2,232
    Don't know if this will help or not. This is from my 67. My 71 had wiring that routed up on top of the fender. This is the original wiring that has had loom put on it and then attached back to the firewall and fender.

    [​IMG]
    [​IMG]
     
    ojgrsoi, May 9, 2013
    #3
  4. May 9, 2013
    1955CJ-5

    1955CJ-5 Member

    Boise, Idaho
    Joined:
    Jul 15, 2012
    Messages:
    330
    Just for you Howard...

    [​IMG]

    [​IMG]

    [​IMG]
     
    1955CJ-5, May 9, 2013
    #4
New Posts