1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

69 cj5 k underside help

Discussion in 'Early CJ5 and CJ6 Tech' started by jf69, Jan 10, 2005.

  1. Jan 10, 2005
    jf69

    jf69 New Member

    Joined:
    Jan 10, 2005
    Messages:
    1
    I had to build a new t14 and have a few extra parts slots ect on crossmember can I get a few pics of this area T14 and trans ect, to makesure I remember since it took 3 months to put it back together thanks
     
    jf69, Jan 10, 2005
    #1
  2. Jan 10, 2005
    John A. Shows

    John A. Shows Comic Relief

    Mendenhall...
    Joined:
    Sep 24, 2002
    Messages:
    938
    I think I have a few extra holes in my crossmember as well...but I believe that when you install the tranny only two of them are going to work....just install the tranny then bolt up the crossmember...and whichever holes lign up use them.
     
    John A. Shows, Jan 10, 2005
    #2
New Posts