1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Location of fuel filler?

Discussion in 'Flat Fender Tech' started by 04sd2, Nov 18, 2012.

  1. Nov 18, 2012
    04sd2

    04sd2 Member

    Lehigh Valley, PA
    Joined:
    May 30, 2011
    Messages:
    111
    I'm currently rebuilding a M38 tub for my latest project and need to put a CJ "gas tank filler neck panel" in the side. Can someone get me measurements on the location from a stock CJ2A or CJ3A. Maybe distance up from the bottom edge of the body and distance back from the edge where the side panels overlap.

    Thanks.
     
    04sd2, Nov 18, 2012
    #1
  2. Nov 19, 2012
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,093
    I can get the measurements for you tomorrow if nobody posts up before then.
     
    garage gnome, Nov 19, 2012
    #2
  3. Nov 19, 2012
    04sd2

    04sd2 Member

    Lehigh Valley, PA
    Joined:
    May 30, 2011
    Messages:
    111
    No hurry, I still need to sandblast what's left now that I cut out most of the bad areas, then I start welding it back together. Thanks.
     
    04sd2, Nov 19, 2012
    #3
  4. Nov 20, 2012
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,093
    10 3/4" from the seam in the door opening and 6" up from the bottom of the tub.


    Sent from my iPhone using Tapatalk
     
    garage gnome, Nov 20, 2012
    #4
  5. Nov 21, 2012
    04sd2

    04sd2 Member

    Lehigh Valley, PA
    Joined:
    May 30, 2011
    Messages:
    111
    Thank you sir.
     
    04sd2, Nov 21, 2012
    #5
New Posts