Thank you for the two graphics . Those will be very helpful in the future. For those of you who have I6 258 engine in your post 72 CJs, can you...
The rear diff had been re directed toward the Tcase, so that’s a good thing. I have 3 options. Get a double cardan, ditch the 4” lift and the 1”...
I recently pulled the carpet out of my 72 CJ5 to twin stick the transfer case and discovered oil coming through a crack in the firewall, opposite...
Hi everyone. First I would like to thank everyone who has contributed to my posts. You’ve all been very helpful in providing solution and info for...
That second one may help. I have a new mechanical on the shelf that I’m gonna use for now but I will upgrade if issues persist. My initial problem...
All excellent input. Thank you . Dwins1-I to like a quiet rig. AndyinTexas- I had not considered tank debris. I have dual tanks and should...
Good options. I’ll look them up. Thanks. The mechanicals function fine when working but I’m installing my third so I’m looking at options if this...
Hi all. I’m having fuel pump issues and want to ditch the mechanical and go electric. Is there anything I need to know about pressure or flow rate...
I had the same issue in my 72. This works if you have the high mount pedal. I shortened the pedal bar 2”, drilled a new pivot hole and re attached...
FinoCJ, PeteL and vtxtasy. You guys called it. I took the tac apart and found a tiny switch inside set to 4. I changed it to 6. Thank you. The...
Well I’ve confirmed I have 3.73 gears so I’m going to look into my linkage to see if I’m not shifting out of low. I don’t see where there is any...
Thank you for your input. I know it’s not in low range and I’ve done the cell phone thing so I know my odometer is spot on. I don’t know about...
Hi everyone. I just read H Tate’s “Top Speed” post June 16th and was surprised at the high speeds folks were describing. I wish! Im driving a 72...
Thankyou for the info
Very cool. Who makes the parts?
Hi all. I’ve got a 72 with the clutch bellcrank between the trans and frame. Frame flex causes my clutch to act wonky so I’d like to modify it....
Hi chris’74. Noneyah here. I’ve got a 72 which needs a spring update. I like how yours sits. What springs did you install and what lift did you do?
Thank you. Mines a little taller but I like how yours sits and am considering going to the 2-1/2”. Thank you for the picks. They are very helpful.
[IMG]Great . Thank you. Any idea who carries these bearings/bushings?
[IMG] [IMG] [IMG]
Separate names with a comma.