Are the beads in the 20" filler section the same length and profile as the toolbox lid?
I highly recommend this wd hitch but find one closer to your towing capacity. It dampens left to right and up/down shimmy which is helpful with...
Check now and make sure the 7pin charges the camper battery and if it drains the truck when parked.
Here is the thread you would want to review. http://www.earlycj5.com/xf_cj5/index.php?threads/150242/
The bow sockets are for the canvas half and full cabs. The canvas is sort of "different" for better or worse.
No sink, unfinished concrete floor, pegboard under the cabinets, shotgun shell door pulls... the van's transmission is also in the same area....
You need to get the fuel injection ordered right meow! Here is the thread on packing tools http://www.earlycj5.com/xf_cj5/index.php?threads/129405/
I'm not so sure about that. With the gm brackets or jeep drums the Spindle has the index bore and the brakes stack on top of the spindle. The...
I like this idea... Same wheelbase as a JKU.
Four trees.
You don't want the clasp there, it will hurt. Is there a drain / dust out hole /mouse /phone cord hole in the corner under the cup holders?
It's a common file that will eventually have configurations. But yes currently it is sm465 awd with two speed pto for a powered trailer... lots of...
You could drive it to college. Maybe even pull a car dolly with a Honda civic along. This picture is taken at a spring reunion in ohio.......
Those look just the same as what I used, mine paid for themselves already in a rock garden. Just a chalk line on the heavy cover but I know the...
A few parts roughed out. I could use more sketches and dimensions for gears. [img]image001 by Joe with a jeep, on Flickr [IMG]image001 (1) by Joe...
Cap the vacuum line to the fuel pump and go for a drive. Here are notes from BrianP who rebuilt mine: https://flic.kr/s/aHBqjA9jxK
No way :study: m38a1 dash goes below the hood line and steering column.. Cj dash stays above the seam between the hood and tub, handle is at the...
Personally I don't like the m38a1 dash, hangs down too low. I'm also blessed with a welded on dash.
Mostly heater, parking brake, and guage issues. I think I might have seen a custom dual glovebox dash posted in a build here.
It's gonna be really hard to hide that, unless I can find "jungle gym blue" and tie it to the swingset. Jpet's die is actually in KC so I can get...
Separate names with a comma.