Well, pulling out the ol calipers I measured it at .886 inches... and terry, you are right, that is a weird size! +1 to the folks at Ididit, I...
So here's a question... considering that the worm shaft is round and smooth, is there any risk in attaching a smooth bore U joint with it losing...
Tarry is correct, and I'm an idiot that doesn't know how to do his research! In order to do the upgrade I want I'm going to have to either cut the...
Being technical, I want to remove the worm shaft so I can replace the entire steering column to put in a tilt unit.
I just want to remove the column so that I can replace it with an Ididit universal tilt, not the beauty tube...
Well, I've done all that, so time to start giving it a good pull!
So I'm removing the steering column from my 62 cj5 and hit a bit of a rough spot. I've removed the steering column to gear shaft coupling and the...
The 134 F-Head. Stock pretty much everything as far as I can tell. The mechanical pump is an Omix Ada, the type with the glass bowl on the top....
I just put in a new fuel pump, and i have no experience with mechanical fuel pumps. I can get the rig started by priming the carb directly with...
Whelp, looks like I see a new right angle drill in my future! Look on the bright side, the money I would have spent on the electric pump...
Ok, that's it. I'm done. I took on the project of overhauling the entire fuel system on my new to me '62 Jeep CJ5. When I pulled everything out,...
Separate names with a comma.