I had the same problem with my 74 w/304. The PO had installed the power steering. I modified my bell coupler to fit the steering shaft. Then when...
You might want to check your transfer case. I had a simular problem. What I found was my transfer case was popping out of low range. Rebuilt...
Thanks alot for doing this!!!!! This will come in real handy since i will be starting a rebuild on my 74, right after elk camp.
I don't know who made the shifter!!!!! I did have to cut and weld it previously to keep it from touching the cut out in the floor. Now after the...
Not exactly sure what you are talking about, but here is a picture of my tranny mount. If this helps? 74CJ5, 304, T15, D20 [IMG]
This my transmission mount setup. I Have a 74 CJ5, 304, T15, D20. Maybe this will help? [IMG]
Here are the pictures!!!!! [IMG] [IMG] [IMG]
O.K. I finally broke down and decided to rebuild the transmission and transfer case. As far as the transmission jumping out of first, I have no...
kf...Being a retired aircaft welder I have seen people that can weld aluminum but could not weld stainless and the other way around. Best advise...
I had to build a set for my 74. As soon as I can will post pictures of what I did. These are not real fancy, just functional. Should be able to...
I made mine out of 1 1/4" pipe since I had some laying around. Attached to the jeep with 2" square tubing. I also made it swing type for easy...
O.K. I now have the casting numbers from the transmission. 13-07-065-901 W-G-01V Just got on Novac web site and indentified it as a T-15. Will...
CJ-X, Thanks for the info on Rancho Shocks.
I also have a 74CJ5. I am not sure on the lift. But my 33X12.50X15's look pretty good to me.
O.K. So far all my posts are probably making me sound like an IDIOT!!!! :oops: But my next question is how do I determine how much lift I have on...
timgr, The VIN #J4F835TA56210, I believe that this will indicate a 6 cylinder. One of the motor mounts to the frame has been cut and welded....
timgr, I cannot read the cast numbers on the side. I have not removed the transmission yet. I am still driving the jeep. nickmil, Thanks for...
I am looking to rebuild my transmission and transfer case. But before I purchase rebuild kits I need help in identifying what they are. I have...
Walt, Yes I have done a search and have not found what I need yet. I will be posting pictures of my jeep as soon as my internet connection is fixed.
Hew I am new to this. I have a problem with my 74 cj. The transmission keeps jumping out of first gear at low speed, also the transfer case will...
Separate names with a comma.