Patrick: I am not a suspension guy, but from what I understand, if I put/remove shims between the spindle and the knuckle, I will be adjusting...
Thanks
Can you guys help me. I have a Dana 27 in my CJ3A, that I got out of a '69 CJ5. I think that there are shims that go behind the spindles to adjust...
I think the problem is solved. Thanks to everyone for the input. I put about a 4 inch piece of 1/4 inch hard brakeline onto the top of the air...
It seems like when I adjust the fuel regulator to less than 4.5, it starves the carb, and there is no power, and it often won't start or idle....
Well, I changed out the float, from a plastic one to the metal one, reset it to the specs, opened the idle mixture screws a little, set the fuel...
It stalls out during a climb. I just messed with it tonight. It seems like I have to keep the fuel regulator at about 4 to 4.5 in order to start...
I will check for vacuum leaks. It just floods out while climbing. I've heard that the fuel somehow gets from the carb bowl, and down to the...
I have the stock, under the driver's seat tank, with the line under the tank.
Has anyone with a Rochester 2 BBL, 225 V6 had a stalling problem when climbing? It seems better with me lowering the float, and also installing an...
thanks. I will try a follow up on the Early CJ5 forum. Yeah, I have been messsing with, and lowering the float, and also put on a fuel regulator....
Thanks. I will check that. It's possible, since the fuel line runs right in front of the engine. I appreciate and will try looking at that. R.J....
It is a Rochester 2 bbl. I think it is off of a '73. My one bbl did not flood out, it is something specific to the 2bbl.
Hey guys. I have a '50 CJ3a with a 225 V6. Love the engine, but my last engine has a 1 bbl, but that engine quit on me. I found a used 225 and...
Separate names with a comma.